Additional information

Weight 15 lbs
Dimensions 13 × 14 × 13 in

$104.22

THE MUG PRESS MACHINE USING INTRODUCTION

1. Plug into the power, open the power. (The machine rated voltage is 220V, the rated input power is 350W)

2. Set the operation procedure 🙁 the temperature shows F degree)
1).The original temperature: Press the MODE SET KEY once, the set indication light will be on, Press the key+ or key – to set original temperature.
2).The Max temperature: Press the MODE SET KEY the second time, the temperature indication light will be on,press the key + or key -to set the max temperature .
3).The max bake temperature: Press the MODE SET KEY the third time, the time indication light will be on,press the key + or key -to set the max bake time .
4).Execution mode: Press MODE set key the fourth time, the machine will go into waiting execution state..
Att: the original time setting range 200~380 degree, the Max temperature setting range 200~430 degree.
The max baking temperature time setting range: 0~999 seconds.

The machine has the function of temperature setting self-locking, so if the original temperature is 340 degree, the machine will control the max temperature range 340~430 degree . Conversely, if the max temperature set 250 degree, then the machine will control the original temperature 200~250 degree.

3. Heat transfer printing

Baking slowly: put the products into the mug press, press down the pressure handle, open the power, so the temperature will go up .When the temperature raise to the original setting temperature, the machine will send out short stridulation, press the execution key once ,till the machine send out dah (long voice). Press the execution key again to finish the heat printing. Take out the product, the temperature will come back the original temperature gradually.

Baking fastly: under the original temperature state, fix the object, press down the pressure handle, press the execution key once, until the machine send out dah, press the execution key again , finish the heat transfer printing . Take out the object, the temperature will come back to original temperature.